11.43 14.84 5.08 5.08 2.6 4.45 2.54 2.54 4.32 feet 1.50 diam 2.54 0.5 sq 0.4 3.5 + ?3.2 2.54 ssa 150 series 3 tier 3mm led assembly the ssa 150 series is a family of display devices using a black nylon 6 ul -94vo rated housing to mount three 3mm leds at right angles to a pcb. the pin out is in line on 0.1? . in any one batch the leds are lumenous intensity matched. ? accurate alignment of leds. ? low current and high brightness available. ? matched leds. ? bi-colour and 2ma leds available. ? direct equivalent to dialight 564-0x00-000 mechanical data bedford opto te chnology ltd 1 biggar business park, bi ggar,lanarkshi re, ml12 6fx tel: +44 (0) 1899 221221 fax: +44 (0) 1899 221009 website: bot.co.uk e-mail: bill@bot.co.uk iss b 14.3.06 page1 of 2 pb this component is rohs compliant
bedford opto technology ltd 1 biggar business park, biggar,lanarkshire, ml12 6fx tel: +44 (0) 1899 221221 fax: +44 (0) 1899 221009 website: bot.co.uk e-mail: bill@bot.co.uk ssa 150 series absolute maximum ratings (t a = 25 o c) parameter red green yellow orange forward current 15ma 30ma 20ma 30ma power dissipation 80mw 100mw 60mw 100mw reverse current @ 5v 10 a 10 a 10 a 10 a operating temperature -40 c to +85 c storage temperature -40 c to 100 c lead soldering temperature 260 c colour lumenous intensity if = 10ma mcd peak wave- length nm viewing angle degrees forward voltage if = 10ma volts orange min typ 7.5 12.0 - 635 - 50 yel- low min typ 7.5 12.0 - 585 - 50 green min typ max 9.0 15.0 - 565 - - 50 - 2.8 red min typ 2.0 4.2 - 697 - 50 opto electronic data (ta = 25 o c) ordering information SSA150xyz x = top led y = middle led z = bottom led indicate colour by using r = red r = high efficiency red b = blank g = green y = yellow low current versions also available see SSA150l series datasheet iss b 14.3.06 page 2 of 2 pb this component is rohs compliant
|
